Tureks Plumbing Services Blog: Archive for the ‘Fox Valley Plumber’ Category

How to Locate Your Sewer Cleanout

Wednesday, August 21st, 2019

sewer cleanout - Tureks Plumbing ServicesThe sewer lines on your property are important pieces of infrastructure because they move wastes and water away from your home. It is therefore essential for you to maintain this system so that it gives you years of trouble-free service. One of the crucial things you should know is the location of the sewer cleanout valve from where you can remove any debris and waste which could clog the system. The experts at Tureks Plumbing Services recommend that you use the following measures to locate this crucial component of the sewer system.

Refer to the Engineering Plans of Your Lot

The cleanout port is an above-ground vertical pipe that drops to the main sewer line on your property. Fox Valley plumbers explain that this vertical pipe usually has a plug at its top to prevent debris from falling into the main sewer line. When an Appleton plumber wants to unclog the sewer line, he or she will most likely start by opening the cleanout and pushing a plumbing snake into the sewer pipe. If you cannot tell the plumber where to find this pipe, then you could pay more as the plumber spends time to search for this fitting.

The first step that Appleton plumbers recommend that you take in your quest for the location of the cleanout access port is by examining the engineering drawings of your home. These documents will point out the different components of the plumbing system, including the location of the cleanout port. Follow the directions given in the plans, and you will find the cleanout port long before the need to use this fixture arises.

Check the Likely Places

Not every homeowner has access to the engineering drawings of the property, especially if it is an older home. In that case, don’t give up on finding the location of the cleanout port. Instead, start your search from the most likely places where this component could be located.

For example, plumbers in Appleton, WI, suggest that you go outside your home to the side where the bathroom is located. Once there, start your search as you move away from the foundation towards the street. You are likely to see this pipe projecting out of the ground.

Plumbers from Tureks Plumbing Services have also seen several homes where the cleanout port is either located in the basement of the house, or it is hidden behind drywall. This is especially likely in homes that are found in cold areas since putting the cleanout indoors prevents it from freezing up during cold weather. Check these places as well and be careful while cutting bits of drywall to avoid damaging electrical wires installed within the walls.

Get Professional Help

If you cannot locate the cleanout after reading the engineering drawings of the home or by searching the places where cleanouts are usually located, it is time to ask Tureks Plumbing Services for help. Our trained professionals have the knowledge and experience to find the cleanout in a short time without tearing up large sections of the drywall or other components of the home during the search.

Once we locate the cleanout, we will use the most appropriate tools to open it and clean it so that the sewer system can function optimally again. So, why bother with this unpleasant task when you can leave it in the capable hands of our professionals? Give us a call today!

Continue Reading

What Kitchen Countertop Should I Choose?

Wednesday, July 24th, 2019

kitchen countertops - tureks plumbing servicesWhen it comes to the overall look of your kitchen, color is almost the single determinant of what you will end up with after a remodel project. For that reason, the home remodel contractors in Appleton, WI put together the following general guide so that you can choose the right countertops for your kitchen.

Softly Veined or Flecked White Kitchen Countertops

White or off-white is a very popular color among people who opt for natural or manufactured stone kitchen countertops. The multi-tonal grain or flecks give the countertop a subtle natural richness.

If you plan on having a traditional kitchen, softly veined or flecked white is the ideal color rather than stark white. Stark white competes for dominance with other features, but the flecked or softly veined white countertop tones down the other dominant features without directly drawing attention to itself.

This color is also ideal for people who want to strike a balance between having a white countertop without having to see each speck of dust or crumb clearly visible. The flecks and soft veins tone down the white color and hide some of the particles which inevitably land on the countertop.

Pure White Kitchen Countertops

It is hard to find a countertop which is pure white if you want natural materials, such as stone. Pure white is more easily available in manufactured materials. Don’t worry about maintaining a pure white countertop as these manufactured materials resist stains and need minimal care. Go for a pure white kitchen countertop if you love crisp, modern kitchens.

People with small kitchens would also be well advised to select a kitchen countertop that is pure white. This is because such a countertop will create an illusion of expansiveness in that small space.

Tureks Plumbing Services also recommends a pure white countertop if your kitchen has other bold materials and finishes, such as cabinets made from dark wood. The pure white countertop will break the dominance of those bold features and create some type of contrast. They’ll also bringing some brightness to the darker tones in the kitchen.

The nautical blue and white color combination are still popular, and a pure white countertop matches well with this color scheme. The countertop will pop beautifully since the blue features will make it stand out a little more.

Woody Colors Kitchen Countertops

Wood comes in many variations of color, and you can select one of these wood colors for your countertop. For example, wood in lighter colors is good for a countertop in a kitchen whose owner wants a casual or rustic atmosphere.

Home remodel professionals in Appleton, WI also suggests that you go for a countertop made of wood if your kitchen already has other elements made from wood. 

If you have pure white cabinets, Fox Valley plumbers report seeing wooden countertops creating a warm effect on the stark white cabinets. Wood is also a good material for a countertop if you would like your kitchen to have a warm and approachable feel to it.

Finally, some people just love wood and cannot get enough of it. If you are one of those people, by all means, get a wood countertop and satisfy your love for this versatile and timeless material!

Black or Dark Colors Kitchen Countertops

For those of you who love dark colors, you aren’t left out if it is time to remodel your kitchen and get a new countertop. You can opt for a dark or black countertop if other features of the kitchen are dark and you would like everything to blend in.

If you have brightly colored cabinets, a dark countertop can bring a dark hue to this atmosphere and the countertop will really shine. Also, for those who want a unified black and white kitchen color theme, a dark or black countertop will fit in perfectly.

There is no shortage of countertop colors, so you should not limit yourself while imagining what your perfect kitchen should look like. Our home remodel professionals at Tureks Plumbing Services will be on hand to bring your dream to reality, so don’t hesitate to reach out for our help!

Continue Reading

How to Remodel Your Kitchen

Monday, July 22nd, 2019

tureks plumbing services how to remodel your kitchenIt can be hard for an inexperienced person to know what steps to take once they have decided to remodel their kitchen. Consequently, the risk of overlooking something important is high, and this can throw the entire project in disarray. Tureks Plumbing Services offers the following tried and true steps that you can follow to make sure that the entire kitchen remodel project goes like a charm.

Decide How You Want to Use the Kitchen After the Remodel

Think about the lifestyle of your household for a moment and note down how exactly you want to use your kitchen once it is remodeled. For example, what kind of layout do wish to have? How many people do you expect to work or gather in your kitchen? Is your current kitchen large enough or you may need to build an addition to it? What kitchen features and appliances would you like to have? Plumbers in Appleton, WI recommend that homeowners gather pictures from different sources. This could be an interior design magazine and compile them in a scrapbook so that these pictures can be used when fine-tuning the final features and look of the kitchen.

Work Out the Scope and Budget of the Remodel

The next step that you should take after getting a rough idea about what you want is to write down the different tasks that have to be done during the project. This is technically called a scope of work. For example, the scope of work can include installing new floor tiles, replacing the existing faucets, and repainting the walls. Along with this scope of work comes a budget. So, you also need to think about how much you are willing to spend on the entire project.

Home remodel contractors in Appleton, WI experts reveal that the scope of work and budget you generate at this point is unlikely to be the final since many changes will be made as you verify the costs of different items and adjust the scope of work within the budget available.

Identify the Professionals You Will Need

Depending on the nature of the work you’re wanting in your kitchen remodel project, you are likely to need the service of different professionals ranging from an interior designer, architect, plumber, and a general contractor or builder.

Tureks Plumbing Services recommends that you involve these chosen professionals as early as possible during the remodeling project so that they can help you with getting the needed permits and advise you on the selection of different materials.

Agree on a Schematic Plan

The next big task that you have to pay attention to is the schematic plan of the project. Home remodel contractors in Appleton, WI caution that homeowners should resist from obsessing with what their kitchens will look like during this process. Only because you can detract from the necessary details of deciding the floor plan and other decisions regarding the sizes and locations of different appliances or features. The schematic is important because it organizes what will go where so that there is room for everything, and it all fits together.

Talk to the Fox Valley plumber you are working with about ordering different materials since the lead times may vary. You also don’t want to work to stall while the professionals wait for the ordered items to be delivered.

Specify Finishes and Fixtures

The next step in the process of the remodel entails specifying what fixtures and finishes you want for your kitchen. This is the point at which all those photos you have been collecting become valuable. From those photos, you need to select one overall style for the kitchen, such as the traditional, classic, cottage, or modern kitchen style.

Once that is done, move on to selecting the different fixtures and their finishes. For example, you may want a granite countertop, matte black faucets, colored floor tiles, and a glass backsplash. Maybe you want to include home automation in your kitchen? Our friends at Specialized AV, a company that offers smart home automation services in NorCal, say it’s an upgrade every homeowner should consider. Be detailed in specifying exactly what you want because the decisions that you make at this point will determine the final appearance of your kitchen once the remodel is completed.

Finalize Designs and Construction Documents

Now is the time to finalize the designs (floor plans, mechanical and electrical drawings, etc.). Headwaters Construction Inc., a Sacramento construction company, says that these final drawings will determine what the contractors will include in their bid for the project in the next step of the kitchen remodel process. Tureks Plumbing Services also adds that the final drawings made at this stage will be submitted to the authorities for any needed permits or approvals before the work begins.

Receive Bids and Select a Contractor

If you hadn’t hired a contractor, now is the time to receive bids from about three contractors and then select one whose bid is the most competitive. At this point, you can still change some of the materials and finishes if the costs quoted by the contractors exceed what you had expected. For example, you can change from a granite countertop to faux granite without changing the overall desired look of your kitchen, according to experienced Fox Valley plumbers.

Get Ready for Demolition Work

If your kitchen remodel includes extensive work, such as demolishing sections of the existing walls, you need to plan for this disruptive activity. For example, plumbers in Appleton, WI, recommend that you prepare alternative space where you will be preparing your meals since the kitchen is likely to be unusable during this phase of the project. Some people even temporarily move while the remodel is undertaken. Talk to your contractor and get ideas on how to prepare for the demolition, and indeed the entire remodel.

Prepare Your Punch List

When the kitchen remodel is nearly complete, you need to observe everything carefully and identify all the little details that haven’t been attended to as required. For instance, there could be a spot that needs touching up with paint, or a cabinet handle that doesn’t work, or even a scratch on an appliance. The list of these items is called a punch list. Give the contractor this list and let them come back to address those little details. Don’t think that the contractor is negligent for not seeing and correcting those issues.

Once the punch list has been addressed, you are ready to start using your newly remodeled kitchen! Tureks Plumbing Services is always available to provide routine maintenance so that plumbing issues don’t detract from your enjoyment of the visual and functional aspects of the remodeled kitchen, so get in touch today![/vc_column_text][/vc_column][/vc_row]

Continue Reading

Your July Home Checklist

Friday, July 19th, 2019

July home checklistSummer is in full gear, and the month of July can come and go in a blink of an eye. With all the holidays and fun family parties, there’s a lot of things that probably need to be done in and around your home. If you aren’t careful and use a checklist to prioritize what you need to attend every month. Use this handy checklist compiled by the experts at Tureks Plumbing Services so that you cover all your bases in this month of July.

Clean Your Porch Lights

You can either clean the porch lights in situ or remove them and use a dishpan to clean them, depending on the type of lights you have. If the fixtures are removable, then take them down carefully since this makes it easier to do a thorough job of cleaning them. If they aren’t removable, then turn their power off and use a moist cloth to clean them. Finish off the job by drying the fixtures using a soft cloth. This is also the time to replace any light bulbs that aren’t working, so don’t forget to get replacements before you start cleaning!

Check Your Home’s Safety Devices

It is a good practice to check your smoke and carbon monoxide detectors every month, so no exceptions should be made for the month of July. Check the batteries and replace them if they are due for replacement and consider replacing any detector which is older than ten years. If you are replacing your smoke and carbon monoxide detectors, consider getting those who are interconnected since this type can alert all home occupants once a hazard is detected. Also, check the expiry date of your fire extinguishers and replace those which are passed their expiry date.

Attend to Your Pets

Summer can be particularly hard on your furry friends if you don’t make ample arrangements for them. For example, avoid leaving your pets at a kennel when you travel since this is very stressful for them. Instead, plan to have a pet sitter so that your pets remain in a familiar setting. Also, remember to have someone watch your pet if you ever decide to leave it inside your car while you run some errands. Provide ample water and access to shade each time you leave your pet at home during the day.

Give Your Windows a Thorough Cleaning

You don’t want dusty windows to limit the amount of sunlight streaming into your home this summer, do you? Get your vinegar solution or commercial glass cleaner and give your windows a thorough cleaning both outside and inside. Complete the task by using a squeegee to dry them. If the windows are very high, don’t risk using ladders to access them. Instead, get a telescoping window washer or hire professionals to undertake this task.

Check All Insect Screens

Summer is almost synonymous with mosquitoes, so you need to make sure your defenses against these pests are intact. Check the window and door screens to confirm that there are no tears or holes to let mosquitoes in. Buy a screen repair kit and fix any damage you observe or get help from home remodel professional in Appleton, WI. With the screens repaired or replaced, no insects will invite themselves into your home.

Improve Your Water Usage Habits

Use the month of July to run a check on your water conservation plans. For example, change the time you water your lawn to the cooler hours of the day so that you limit water loss to evaporation. This could also be the best time for you to install a smart sensor in your sprinkler system so that you can conserve more water. Check for and repair any water leaks inside and outside your home. Our expert plumbers at Tureks Plumbing Services are at your service to check for and fix any plumbing issues that you may have on your property.

Protect Your Landscaping from Fire Hazards

The heat of summer also poses fire risks if your area is particularly dry during this time of the year. Protect the landscaping from outdoor fires by removing any dry weeds, fallen leaves, and any other materials that can ignite if a fire broke out outside your property.

Get Ready for Your Summer Guests

This is the time to clear out any items you had stored in the guest wing of your home. Bring fresh towels in, lay the bed, and place a basket containing bottles of water in a visible place. It is also necessary to get all the needed toiletries into the room before your guests arrive. A bunk or trundle bed is a good idea if your overnight guests may have kids.

Repair or Replace Fence or Garage Door Components

Inspect your fence and identify any components that are old or in disrepair. This is a more taxing home remodel project in Appleton, WI so doesn’t hesitate to reach out for professional help if you aren’t up to the task. If you are handy with tools and have ample time, then, by all means, do it with one or more of your family members.

When was the last time you checked your garage door? Wear and tear naturally happens over time. Our friends at LMS Garage Doors, recommend annual garage door maintenance to avoid garage door replacement.

Assess the Safety Measures of Your Pool

If you have a pool, now is the time to check and upgrade the safety measures that are in place to safeguard your kids, family members, and guests from avoidable risks. Do you have a safety cover on the pool? Is the gate up to code? Is the pool fence free from damage? Ask a professional to help you upgrade any safety mechanisms that are required by law or those you wish to include as extra layers of protection. The additional features you can consider include an alarm that lets you know when someone opens the pool gate.

This to-do list is by no means complete, but you can use it as a handy guide to jogging your memory about the other things that you need to get done in and around your home. For all your plumbing-related remodel projects, contact Tureks Plumbing Services, and we will be glad to help make your dream home a reality.

Continue Reading

Kitchen Storage Must-Haves

Wednesday, June 12th, 2019

kitchen storage must havesIf you don’t plan the kitchen storage correctly, you will be irritated daily as you use this important part of your home. The process of organizing this storage starts with assessing what you own. The next step in the process entails preparing storage space for those kitchen belongings following the three sections or workspaces within the kitchen. This article discusses the different items which you can store within the three work zones in your kitchen.

Work Area #1: The Refrigerator

This work zone marks the area where two primary activities take place. First, any groceries or food items you buy reach this area before they are stored or prepared. Secondly, the first preparatory steps as you cook often take place within this work zone.

The first thing you should do, therefore involves positioning the fridge close to the entrance into the kitchen. This will save you from having to walk across the entire kitchen with heavy groceries to access the refrigerator at the end of the room.

One of the features of the refrigerator work area is a countertop. This provides space where you can place groceries before you sort the items by the type of storage that they need. For example, you can pick the items which require refrigeration and place them in the fridge while the dry goods can go into a storage cabinet.

Plan to store your staples within the refrigerator work area. The items or tools you use for this initial preparation, such as mixers, graters, salad molds, and measuring cups should be stored in the cabinets within the fridge work zone.

The appliances used to prepare dry goods, such as the coffee maker, also go in the refrigerator work zone. Similarly, cookbooks are best stored in this zone because the initial preparation of dry goods happens here.

The exact amount of storage space that you need for this zone will depend on your needs as an individual. For example, an empty nester will need a lot more storage space than a single person who is just starting to acquire kitchenware. The important thing to remember when planning the storage space for this zone is that the area should be divided into about four categories (dry food storage/pantry, original food preparation equipment and tools, the refrigeration space and space for storing small appliances or utensils you occasionally use, such as bowls and trays).

Work Area #2: The Sink

The sink work zone sees the most traffic because it is needed by the refrigerator zone and the cooking area. It is therefore wise to place the sink zone in the middle of the refrigerator and cooking spaces so that this vital area can be accessed conveniently.

A sizeable countertop is paramount in this area, and it should be as clutter-free as possible so that it can be used easily. 

Fox Valley plumbers explain that food prep and cleaning up happens in this area, so don’t skimp on space for these important activities.

Recycling and trash containers should be thoughtfully positioned in this work zone so that it is effortless to get rid of the trash generated during the food preparation process or the cleaning that happens afterward. A plumber in Appleton, WI can help you to select the best recycling and disposal equipment for this work zone.

Glassware, dishes, cleaning supplies, and the other items which you use daily during food prep and clean up should be stored within the sink work area for easy access. Cutting boards and knives should be stored within this zone, but close enough to the refrigerator zone so that any activity in the fridge zone that requires these items can be executed without the unnecessary inconvenience of walking a significant distance to get the needed item.

Drinking glasses can also be stored in this zone close to the point at which they are cleaned. Drawers or wall cabinets can work for this purpose, depending on your preference.

Keep items which are related closely to each other in this zone. For example, put coffee mugs in the drawers closest to the coffee maker.

Once again, the size of the space for the sink work area will depend on your belongings, but it should also be divided into four areas, namely, trash and recycling; dishwasher, sink and cleaning supplies; glasses, flatware and dishes; and finally cutlery, small appliances, and cutting boards.

Work Area #3: Cooktop/Range Area

As the name suggests, this zone is the area where cooking takes place. The ovens, range, or cooktop are the main features of this work area. This zone should be located closest to the dining room so that what is prepared doesn’t have to be moved over a long distance to the dining room/area.

A countertop is paramount in this area for the placement of hot items which have been removed from the oven or cooktop.

The storage space around this area should contain the different items, such as bowls and platters, which you use to transfer food to the dining room. You also need to set aside a cabinet for the cookware used frequently. Warming appliances should also be stored within this zone.

Spices, pans, and pots, as well as other cooking utensils, should be stored as close to the oven and range as possible for easy access during the process of cooking. You can store these items in drawers or upper cabinets, whichever suits you better.

Divide the storage space by the categories of items most used in this work zone. For example, one section can be for the cooking surfaces (stove, for example). Another section should be for microwaves or ovens. Next, reserve space for storing bakeware, cookware, and some small appliances. Finally, the items used when serving food also deserve their own space.

Use the number of people in your household as a guide when deciding how big each storage space should be. Once you organize the kitchen storage appropriately, it will be a joy to enter this space and prepare a meal for you and your loved ones each day. This cannot be possible when the plumbing isn’t just right, so partner with our experts at Tureks Plumbing Services for high-quality plumbing installation and maintenance for your dream kitchen remodel.

Continue Reading

7 Things to Consider Before You Remodel Your Bathroom

Wednesday, June 5th, 2019

things to consider for bathroom remodel

Things to Consider Before a Bathroom Remodel

A bathroom may be one of the smaller spaces in your home, but a lot of thought needs to go into the process of remodeling this room if you are to benefit from the time and effort invested. Here are some of the top considerations which you need to have in mind if you are to turn this space into your dream bathroom.

Plumbing is Key

Plumbers at Tureks Plumbing Services caution that you may never get to enjoy your remodeled bathroom if the plumbing isn’t working properly. In this regard, Fox Valley plumbers suggest that you think about the hair and gunk which finds its way into the bathroom drain on a daily basis. These substances are the primary reason why bathroom drains clog, so you should use the remodel as an opportunity to find a lasting solution to this problem.

One step that you can take is to install a larger drain pipe, such as a 2-inch pipe instead of the commonly used 1.5-inch pipes. This single change alone will significantly reduce the likelihood of clogs developing since the pipe will be large enough to allow hair and other small solids to flow through.

Floor Tiles

If you are considering using tiles on the floor of the shower area, pay attention to their size. Larger tiles are difficult to slope appropriately. Secondly, larger tiles pose a safety risk because they tend to be more slippery since the grout lines are widely spaced. Tureks Plumbing Services, therefore, recommends that you opt for smaller tiles so that you don’t have a hard time getting them to slope at the angle you want for proper drainage.

Drawer Storage

Opt for a vanity with drawers instead of one with doors. You will find it easier to organize the storage if it has drawers when compared to keeping the vanity storage organized if it has doors. Additionally, drawers can be cut to create room for plumbing pipes and fixtures. You can also have larger drawers made for the storage of larger items.

Wall-Hung Toilet

Another idea you can incorporate during your bathroom remodel is the inclusion of a wall-hung toilet. In the past, these toilets were very expensive and therefore a preserve of those with deep pockets. Today, wall-hung toilets are affordable and within reach for any homeowner. Why would you even add a wall-hung toilet to your bathroom? This type of toilet is ideal for smaller bathrooms because their footprint is smaller since the toilet tank is hidden away in the bathroom wall. However, you should be mindful of the fact that you will need to adjust the plumbing should you ever decide to switch to another type of toilet in the future.

The Medicine Cabinet

Consider installing a recessed medicine cabinet if you can. Such a cabinet will leave more room free above the vanity. If you cannot have a recessed medicine cabinet, then elevate it as much as you can so that the countertop on the vanity can be used conveniently.

Lighting is Vital

Fox Valley plumbers emphasize that careful planning should be invested in the lighting of a bathroom during a remodel so that all the other work done isn’t downplayed by improper lighting. First, ask yourself what you plan to do in the bathroom. Will you be applying your makeup from there? Place bright light in strategic locations so that you can see clearly when using the mirror. Install a dimmer switch which you can use to control the brightness of the light when you wish to adjust the atmosphere in the bathroom. Recessed lights would also be a good addition to keep the bathroom well lit.

You can be sure that the bathroom remodel will stand the test of time if you include many of the considerations above as you plan that remodel. For all your plumbing needs during the bathroom remodel, contact Tureks Plumbing Services. Our experienced professionals are at your service.

Continue Reading

6 Stylish Bathroom Vanities with Great Storage

Wednesday, May 29th, 2019

bathroom vanities with great storage

6 Stylish Bathroom Vanities with Great Storage

You don’t have to choose between style and storage space if you are shopping for a vanity for a powder room or bathroom with limited space. Designers have come up with stylish vanities that provide ample storage for all the necessities that you need to have in your powder room. In this article, you’ll discover some of the most popular vanity designs that Fox Valley plumbers have seen in bathroom remodels.

Downscale to a Child-Sized Vanity

You don’t have to place a full-sized vanity in a bathroom used by kids. Match their stature by scaling the vanity down to a miniature version fit for a small kids’ bathroom. For example, the width of the vanity can be no bigger than the size of the sink at the top of that vanity. Two drawers can be located just below the sink and bigger shelves can house larger items, such as towels. The child-sized vanity can store enough supplies for two kids!

Barrel Vanity

A barrel-shaped vanity can also take sleekness to a whole new level when it is installed as a space-saving option. The barrel shape provides more vertical storage space while limiting the horizontal footprint of the vanity. The beauty of such vanity is that its doors open to an angle that exceeds 90 degrees, so it is possible for you to make maximum use of the space inside without fearing that the door will limit your access to the stored items.

Modern Minimalism

If space is at a premium in your bathroom, then opting for a minimalist approach when selecting a vanity will do wonders for you according to the small bathrooms seen by plumbers from Tureks Plumbing Services.

A vanity made in this style features plenty of space on the countertop where you can keep your toiletries and a soap dispenser. An open shelf above the cabinet can do a good job of creating an impression of spaciousness instead of closed cabinetry that may highlight how small the bathroom is.

Go Furniture-Style

Do you own a vintage home that you would like to get a vanity that matches the style of that home? A furniture-style vanity can provide incredible storage for the small bathroom and add provide visual appeal to that space. For example, a compact 30-inch-wide furniture-style vanity with several cabinets and drawers will store sufficient supplies for the couple using the master bedroom for whom the powder room is being outfitted.

Classic Chrome Console

Another way to make the most of a small bathroom is by getting a console vanity which is no more than 30 inches wide and approximately 32 inches tall. A bottom shelf can provide more storage space underneath the console. The console bases leave plenty of room underneath the console, so your bathroom will look roomier. The bonus? This style of vanity gives the home a traditional look.

Customized Cottage Vanity

Some bathrooms are so small that it is not possible to get a store-bought vanity into them. For such situations, a site-built vanity is a feasible option with a small but versatile vanity being made to fit within the available space. A Fox Valley plumber describes one such cottage vanity as being quartz-topped. The countertop holds soap and toiletries. Just below the countertop is a toilet tissue holder, and the storage space is completed by an open shelf below the toilet tissue holder. The shelf has ample space for keeping towels. This cottage style is easier to pull off when the vanity is made at a time when the entire house is being remodeled to that style.

Whether you are buying ready-made or have the resources for a custom-made vanity, there is always something to provide great storage in your powder room while also meeting your stylistic requirements. If you need sections of the storage to be fitted around plumbing fixtures or pipes, Tureks Plumbing Services is happy to drop by and give their professional opinion on how the vanity can fit without endangering the plumbing.

Continue Reading

How to Upgrade Your Shower for a Spa-Like Experience

Thursday, May 9th, 2019

how to upgrade your shower for a spa-like experience

How to Upgrade Your Shower for a Spa-Like Experience

Even within the same household, it isn’t uncommon to find differences in people’s shower preferences. For example, you may want a drenching pour of warm water on your tired body or you may want your aching back to be soothed by a jet of cold water. How can all these interests be catered when upgrading your shower? The experts at Tureks Plumbing Services offer the following ideas to help you to design the shower experience of your dreams.

Think Carefully About the Showerhead You Install

The nearly endless variety of showerheads on the market can be grouped into four major categories (handheld showerheads, body spray panels, rain showers, and standard wall-mounted showerheads).

If you want to control the direction and height of the water as you shower, Fox Valley plumbers suggest that you buy a handheld showerhead. Conversely, if you prefer water to rain down on you from above, then buy a rain showerhead. In short, let your preferences guide you as you select one of the shower types on the market.

Actually, there are products which combine different ways of getting water onto your body as you shower. For example, one model may have both a handheld showerhead and a rain showerhead.

Think Technology

It is also possible to make your shower experience more luxurious and convenient by selecting products that have the appropriate technology. For example, Fox Valley plumbers have installed showerheads that allow users to switch from one spray pattern to another by just tapping the showerhead.

You can also get a showerhead that comes with a small remote so that you or your family members can avoid the necessity of reaching up to tap the showerhead. This feature is especially useful if you have young kids or an elderly family member who has mobility challenges. It can also be a good way to age-proof your shower.

Pay Attention to the Shower Stall

The design of the shower stall has a big effect in determining what kind of shower experience you will have, according to a plumber in Appleton, WI.  For example, a shower stall with a half-glass wall wouldn’t allow a person who likes splashing water around to enjoy taking a shower. A shower stall with a full-glass surround is a better option for such an individual since there will be no restriction on how splashy they get when taking a shower.

The experienced plumbers at Tureks Plumbing Services also recommend that you think about usability and safety when you are having a shower stall designed for your home. For instance, curved surfaces remove the risk of being injured by sharp edges. Curved surfaces also reduce the likelihood that mold will grow in the nooks created by sharp edges.

Explore Different Finishes

The finish that you select for your shower can also add to or detract from the shower experience. For example, a dash of color can stamp your bubbly personality on the bathroom and lift your spirits each time you use this space. Small tiles will assure you of better stability if you are consumed by the fear of slipping as you walk after taking a shower.

As you choose the finish for the bathroom, don’t neglect to consider how easy it will be for you to clean those surfaces. For instance, larger tiles mean fewer grout lines that will need to be scrubbed. Similarly, engineered quartz panels are easier to maintain when compared to natural stone. Luckily, manufactured products have advanced so much that it is hard to tell them apart from the natural ones by just looking, so you will not lose anything when you select natural product look-alikes if these will offer greater cleanability when compared to the natural versions.

As you can see, there is nearly no limit regarding the ways through which you can customize your shower to a spa-like experience. If you need more inspiration regarding how to take your shower experience to a higher level, talk to our professionals at Tureks Plumbing Services and they will point you in the right direction. In fact, your glorious experience will be guaranteed when you hire our team to help with the selection and installation of the different shower products.

Continue Reading

7 Signs You Need to Replace Your Sump Pump

Wednesday, April 10th, 2019

Signs You Need to Replace Your Sump Pump - Tureks Plumbing Services7 Signs You Need to Replace Your Sump Pump

The sump pump in your basement plays a crucial role in evacuating any water leaks into this lowest point in your home. However, this trusted equipment can fail and result in serious water damage to your property. It is therefore advisable for you to educate yourself about some of the warning signs of a possible sump pump failure so that you can take action in time to avert a disaster. Here are the top signs that Tureks Plumbing Services advises you to watch for in order to replace your sump pump before the worst happens.

Types of Sump Pumps

Submersible Sump Pumps: Submersible pumps are submerged inside the sump pit. They are designed to withstand water damage while submerged in the pit. One major advantage of submersible sump pumps is that they operate noiselessly because the water surrounding them muffles any noise produced by the motor. Additionally, the motors of these pumps tend to be more powerful than those in pedestal pumps, and this makes them the best choice for locations where flooding is most likely to occur. The pumps are also out of the way, so you will not be inconvenienced as you rearrange things in your basement. However, the typical lifespan of submersible sump pumps is shorter than that of pedestal pumps.

Pedestal Sump Pumps: These pumps derive their name from the pedestal on which their motors sit above the sump pit. The pump has a hose that drops into the sump pit and the pump uses this hose to draw the water out. This pump is easier to service because the motor is in an accessible location outside the sump pit. However, plumbers in Appleton, WI say the pump isn’t as powerful as the submersible versions. So, you would be well advised to avoid installing this pump in your basement if the possibility of flooding is high in your area. Also, the pump can be an inconvenience while you rearrange things in your basement. Pedestal pumps are also noisy while operating.

Signs That Your Sump Pump Is Due for Replacement

1. Age

All machines eventually reach the end of their service life, and sump pumps are no different. Talk to a Fox Valley plumber about replacing your sump pump if it has exceeded seven years in service. This discussion is necessary because sump pumps rarely last beyond 10 years, so you are better off not taking chances with an aging pump.

2. Excessive Vibration

Sump pumps usually start vibrating when their impellers have been bent by debris that has been sucked into the pump. Bent impellers are no longer balanced on the shaft, so that throws the operation of the entire system out of whack. The strain caused by the imbalance of the forces exerted on the shaft is a recipe for serious pump problems later on. It is hard to straighten a bent impeller to its original dimensions, and that is why the best course of action to take is to replace the pump. Avoid this premature replacement by installing a filter to keep debris from being sucked into your sump pump.

3. Nonstop Operation

Switch malfunctions are the biggest cause of a sump pump that runs nonstop. For example, plumbers from Tureks Plumbing Services frequently find that the pump switch is unable to connect to the power source, thereby preventing the pump from cycling on. Alternatively, the float arm may be unable to move freely if the pump shifts within the sump pit. These switch defects account for a significant portion of sump pump defects.

A more serious problem that may prompt you to consider replacing the sump pump is if that pump keeps running nonstop when no other mechanical or technical defect can be identified. In such a case, the pump may have inadequate capacity to handle the load of water in your basement.

4. Visible Rust

Another reason why you should consider replacing your sump pump is when you see rust from this equipment. Rust could be coming from corroded terminals. Iron bacteria can also cause visible rust, so you should ask a plumber in Appleton, WI to take a look before you replace the pump prematurely.

5. Pump Runs for Abnormally Long

A properly sized pump normally runs for variable durations depending on how quickly water is accumulating in the sump pit. However, some pumps may run for an inexplicably long time before turning off. Such a scenario may point to the fact that the pump is undersized for the task at hand. For example, the water discharge network may have several bends that require a lot of power from the pump if the water is to flow through the pipes to the discharge point. Alternatively, the distance over which the pump is required to push the water may be so long that the pump could be straining to perform that task. The best option in such a case is to consult Tureks Plumbing Services so that an appropriately sized sump pump can be installed in the place of the undersized one.

6. Irregular Cycling

You should also have your pump checked if it keeps cycling irregularly. For example, does it start and run for just a few minutes, and then restart shortly after even when there hasn’t been any heavy rain? The float switch may be improperly set or there could be an electrical defect. A plumber in Appleton, WI can take a look and advise on the way forward, which may include replacing the pump.

7. Frequent Power Outages

It may also be necessary for you to consider replacing your sump pump if you have been having frequent power failures. Such incidents expose the electrical components of the sump pump to so much stress that the entire unit may soon fail. Install a surge protection system for your entire home and the sump pump before you procure a new pump.

It may be costly to replace your sump pump, but have you considered the likely cost of dealing with water damage to your property if the sump pump fails as a heavy bout of rain falls in your area? Don’t take that risk. Contact us at Tureks Plumbing Services for an assessment of the health of your sump pump. We shall fix what can be fixed or advise you to buy another pump if our experts realize that your existing pump can no longer be relied upon to evacuate water from your basement.

Continue Reading

Plumbing Mistakes New Homeowners Make

Thursday, March 28th, 2019

plumbing mistakes homeowners make - tureks plumbing services

Top 7 Plumbing Mistakes New Homeowners Make

The hassles associated with moving into your first home can drain you to the bone. It is therefore not surprising that you may easily make several rookie mistakes as you undertake some plumbing repairs to fix problems that went undetected when you were checking the home before buying it. Here are the top plumbing mistakes that the plumbing professionals at Tureks Plumbing Services regularly encounter with inexperienced first-time homeowners.

Thinking Any Tool Will Do

Many homeowners don’t have a sufficient collection of plumbing tools to attend to every plumbing defect that may arise. The temptation to improvise when you want a quick fix to a plumbing problem can, therefore, be high.

However, Fox Valley plumbers advise that you avoid using any makeshift tool when tackling plumbing problems because you risk making the problem worse or injuring yourself. For example, not any random tool that you find can cut a metallic plumbing pipe. Only undertake a plumbing project in your new home if you have the right tools for that job.

Taking Long to Fix Minor Defects

Another common mistake that plumbers in Appleton, WI see is that homeowners neglect to fix plumbing problems that they regard as minor. For example, you may not pay sufficient attention to a dripping faucet because you’re busy settling in. 

Those plumbing issues that you regard as minor can worsen and be costly to fix later on. For example, the dripping faucet can cause water damage to the floor and walls. A running toilet can flood. The list goes on and on. It is therefore advisable for you to fix each plumbing problem you notice as soon as possible so that it doesn’t get a chance to get any worse. If you can’t, then call a Fox Valley plumber for help.

Not Shutting the Water Off

It is very easy to get distracted by the task of putting together the different tools and materials that you will need for a plumbing project, and you forget what professionals consider to be Plumbing 101; turning the water off before you start.

Many homeowners confess that they learn this the hard way after getting started and having water gushing into their faces at high pressure. The resultant water damage from this mistake can be enough to make some people vow never to undertake any plumbing DIY project.

Don’t let this happen to you. Learn from the mistakes of others and shut the water off before you begin fixing any plumbing defect. Tureks Plumbing Services recommends that you locate the shutoff valve of the particular plumbing fixture that you want to fix so that the rest of the home can still have running water. For example, your kitchen faucet has a shutoff valve somewhere underneath the sink. The toilet also has a shutoff valve somewhere behind the toilet tank. Use the main shutoff valve located outside the home if the repair you want to undertake affects the main water line, or when you can’t locate the shutoff valve for the defective fixture.

Mismatching Plumbing Materials

One major shortcoming of DIY projects is that many homeowners don’t have enough experience to know that some materials don’t go well together. For example, did you know that you can trigger large scale water pipe corrosion if you join two pipe sections with a metallic connector that is not compatible with the pipes you are joining?

Talk to a plumber in Appleton, WI before you buy plumbing repair materials. That way the professional can guide you about which material is compatible with your home’s plumbing system. This guidance will save you from installing incompatible materials that can end up creating bigger problems.

Doing Unpermitted Work

The plumbing code usually stipulates which plumbing projects can be done without a permit and which ones require a permit. It is vital that you ascertain whether the project you want to take on requires you to get a permit from the authorities or you don’t need one.

Otherwise, unpermitted work can result in serious issues later on. For example, you may find it hard to get a buyer for that home if the pre-purchase inspection uncovers unpermitted work. You could also be prosecuted and fined if the authorities discover that you didn’t obtain the necessary permit required. It doesn’t hurt to talk to a Fox Valley plumber as you plan your plumbing project just to be sure that you won’t run into any problems later.

Careless Mistakes While Soldering

Some plumbing projects, such as repairing pipe leaks, may require you to do some soldering. Be extra careful if your project requires you to bring out your soldering torch. For example, ensure that you have covered or removed anything flammable from the work area before you start. Additionally, you should never set the torch down when its flame is still lit. Exercise caution and be aware of your surroundings at all times while you work. If you aren’t sure about your ability to implement all the necessary safety precautions, simply call a plumber in Appleton, WI for help.

Not Asking for Professional Help

It is okay for you to fix as many plumbing problems in your home as you can. Our team at Tureks Plumbing Services make it our duty to share useful information that can empower you to resolve plumbing problems without calling an expert each time a problem crops up. However, we always caution homeowners to know their limitations. Always ask for professional help when situations go out of your expertise. This is serious enough to warrant repeating; contact Tureks Plumbing Services each time you are faced with a plumbing problem that you are unable to fix on your own. We are available 24/7, so don’t put your safety and property at risk when we can sort the problem quickly.

Continue Reading