You are seeing this message because we have detected you are using Internet Explorer 10 (or older) to browse our site. Unfortunately, this means that your browser is too old to display our site properly and that certain areas of the site may display incorrectly or not at all. Please upgrade to the latest version of Google Chrome, Mozilla Firefox, Internet Explorer, Microsoft Edge, or Apple Safari in order to view this site.
This is an essential tip for any homeowner, and one that is criminally underrated.
It’s heartbreaking each time we’ve seen leaks and burst pipes become disasters due to a homeowner not knowing where their water shut-off valve is.
These components are vital in an emergency, and they’re going to save you time, stress, and keep your furniture safe when a leak does occur.
Since this is an informative blog, we can’t just tell you where the location is and call it a day. That would be too easy and it wouldn’t be right, since you’re probably wondering how this part works and why it’s so important.
So, let’s answer all of your questions and give a thorough examination of the intricacies of your water shut-off valve. Let’s discuss what it is, why it’s there, and how it’s going to be important during the next plumbing emergency in Appleton, WI.
Preventing Clogged Toilets and Other Bathroom Mishaps 2021
We all know how inconvenient a clogged toilet can be. Fortunately, you do not have to possess advanced plumbing knowledge to keep your bathroom in good working order. Here are some tips from our Fox Valley plumbers that will help you in preventing clogged toilets and other related problems. For emergency plumbing services in Appleton, WI, please contact Tureks Plumbing.
Use Mild Cleaners For Your Toilet
If your toilet tends to get backed up, there are some mild cleaners you can try using. Apart from mild soaps, try mild items like baking soda and vinegar that can help you keep your toilet squeaky clean. Apart from keeping your toilet hygienic, regular cleaning will also allow you to spot potential problems before they worsen.
Avoid Chemical Drain Cleaners
Plumbers are divided on the issue of chemical drain cleaners. For some, using these is all right. However, there are plumbers who believe that the disadvantages of these outweigh the advantages. What disadvantages? Chemical drain cleaners can be hazardous to your health, especially if used and handled incorrectly. These can also damage pipes and fixtures and kill beneficial bacteria in the septic tank. Read this article why to learn the reasons not to use chemical drain cleaners.
Conduct Regular Inspection
Make it a habit to check the components of your toilet every six months. Check whether everything is functioning correctly.
Trying To Save Water
Using a brick is one of the old tricks for saving water used for flushing. However, this only works for older toilets. But you still might want to avoid using bricks as these can break off into smaller pieces which can then clog the toilet. Instead, fill a water or soda bottle with either sand or small rocks.
Get Bathroom Leaks Fixed ASAP
Small bathroom leaks can add a few and sometimes several more dollars to your monthly bill. Check your toilet and faucets regularly and when you detect leaks, have these repaired as soon as possible. Our friends at Gilmore Heating, Air, and Plumbing, a Sacramento plumber, also urge you to stop leaks. Plumbers will tell you that it can cost you 20 gallons of water per day if it’s not fixed.
Don’t Use The Toilet As A Trashcan
Every member of the household, including the young ones, should learn how to properly use the toilet. That also means avoiding throwing foreign objects into it. Although this is sometimes unavoidable no matter how closely you watch your children, we hope your little ones bathroom play is limited to the tub and those rubber duckies.
Consider Using a Different Kind of Toilet Paper
Super soft toilet paper can be quite difficult for the septic tank to break down and can lead to further problems down the road. Consider using a different type of toilet paper. Also, check out our recent post on flushable wipes.
Invest In a Flange Plunger
A flange plunger (and a bucket of hot water) will often suffice for common clogs. Alternatively, you can use a snake or auger, but if that is not something you are familiar with, give us a call. We will be able to quickly get a plumber over to your home to inspect and clear out the problem.
Don’t Be Afraid to Get Expert Help
Sometimes, plumbing problems can be complicated and you might find yourself out of your zone of genius. There’s certainly nothing wrong with asking your local plumber for some assistance in these cases. There are some plumbing problems that are DIY worthy and others, where you just need to call in a professional. If you live in the Fox Cities area, give Turek’s Plumbing a call for all of your plumbing emergencies, and kitchen or bathroom remodel estimates.
Editor’s note: This post was originally published in May 2016 and has been completely revamped and updated for accuracy and comprehensiveness.
There are plenty of plumbing problems that don’t seem like they need to be fixed immediately. For example, a faucet that drips or even slow drains in your home. Most Fox Valley homeowners will wait until it gets much worse before taking action. As your local plumber, trust us when we say fix the problem before it becomes an even bigger problem. This is especially true with slow drains — when water in your sinks, tube, or toilets is moving slowly, we encourage you to pay attention to that. If you have a chemical drain cleaner that doesn’t seem to solve the issue or the issue returns within a few weeks, that is a sign there is something in your main sewer line that is causing the problem. In this article, our Tureks Plumbing team shares how to speed up slow drains in your home.
When To Call A Local Plumber
Most emergency plumbers will tell you that slow drains should never be dealt with lightly because they are usually in the early stages of a serious and complex plumbing issue. What may eventually happen is all of your plumbing fixtures will back up and possibly become unusable when slow drains are ignored. Slow drains could mean that there’s a growing buildup in your drain, and when there’s a buildup of anything, there’s always a risk of damage to the plumbing structure.
Slow Drains Aren’t Safe
Also, clogs can cause widespread contamination. Say, your kitchen sink won’t drain quickly; germs and bacteria from the drain and the sink will just settle and breed there. That area of your home will stink, and fungus and other unsavory elements might grow. Our friends at McQuillan Bros, who offers Twin Cities Plumbing services, agree that those experiencing slow drains are creating a bigger problem than just an inconvenience. It’s important to hire a professional if you continue to experience slow drains.
Slow Drains Are Frustrating
That’s not the only inconvenience you’ll have to deal with; naturally, you won’t be able to use your kitchen sink for washing dishes and all the other tasks you normally use it for. Your routine will have to change, and that can affect your quality of life at home.
However, slow drains shouldn’t make your life difficult because they’re very easy to solve. Any emergency plumber can take care of this issue and restore the proper working order of your plumbing system. Whatever the reason behind it may be, the best plumbing professionals have a collection of effective solutions ready.
May Need Drain Cleaning
For clogs in the drain pipes, emergency plumbers in the Fox Valley area use a specialized sewer camera to examine the root of the clog and to pinpoint its exact location. In an attempt to solve the problem of slow drains, they use everything from a high-pressure water jetter, to an auger, to a variety of special plumbers tools to quickly dislodge food debris, soap scum, and other buildups so wastewater can flow away from the house quickly. This is usually done from the main sewer clean-out located on the outside of your home.
That’s not all plumbers do when they take care of slow drains and get rid of blockages in the sewer lines. They also inspect the structural integrity of the plumbing system to see if there are other issues present that may be contributing to the faulty performance of the system or issues that have developed as a result of the initial plumbing problem. For example, pipe corrosion, or something like tree root damage that may impact your sewer system. Ask Tureks Plumbing about our trenchless sewer drain repair services.
Contact Tureks Plumbing in Appleton, WI
If you’re dealing with slow drains, that’s a real problem that you need to address appropriately — right away. Call in the pros and put an end to the inconvenience it creates. If you are in need of an experienced plumber or drain cleaning service in Fox Valley, give Turek’s Plumbing a call, we are here to solve your plumbing problems and earn your business.
Editor’s note: This post was originally published in June 2016 and has been completely revamped and updated for accuracy and comprehensiveness.
Summertime life may be carefree and simple, but that is not the case for plumbers and many homeowners. Summer can be a time of clogged drains and overflowing toilets. The reason for more plumbing service calls during the summer season is pretty simple. Kids are home throughout the day, which can result in more plumbing problems, says our Appleton plumbers. During this season, families are more active, so it’s likely that more things are getting dumped down the drain or disposed of. In this article, we share plumbing tips for a clog-free summer in Appleton, WI!
Watch What You Flush
According to Tureks Plumbing Services, more frequent clogs are a side effect of using water-saving toilets. As a result, people must be more cautious about what they flush. Wet wipes, while convenient, might block sewage systems. Even flushable items will not dissolve as fast as toilet paper. Trust us when we say that if you constantly put “flushable” wipes in the toilet, you will have plumbing problems.
Flushable wipes aren’t the only item you have to watch for. Paper towels, napkins, and even too much toilet paper can clog your toilet. When flushing the toilet, our Fox Valley plumbers recommend keeping the handle down to ensure a full flush that pushes everything through.
Take It Easy on Your Kitchen’s Garbage Disposal
Being mindful about what you put down in the garbage disposal can help you avoid additional plumbing problems. Many garbage disposals have difficulty grinding up summer staples like melon rinds and corn cobs. Grease from barbecues is another summer clog reason. Never pour hot grease down the drain or garbage disposal. The liquid you pour down combines with the leftover food to harden into a sticky substance. When you use your garbage disposal, make sure it is clear by flushing it with plenty of water.
Don’t Put Your Hair Down the Drain
For a clean, cool summer look, many individuals clip and shave their hair. However, do not attempt to wash your hair down the bathroom drain because the mix of hair, soap, and toothpaste can form an impenetrable clog. Consider placing hair catchers in shower and bathtub drains for persons with long hair. There are plenty of affordable devices that will collect your hair before it goes down the drain. It may be gross, but it will save you money ontrenchlesssewer repairs.
Bathtubs may be kept clear with a little regular care. According to Tureks Plumbing, dumping a gallon of boiling water down your bathtub drain once a month will help you have a clog-free summer. After that, it’s a good idea to run regular warm water for approximately five minutes simply to keep pushing everything as far down and out as you can. Our friends at Gilmore Heating, Air, and Plumbing, a plumber Sacramento, recommends staying away from chemical drain cleaners. They’re not recommended for the life of the plumbing system. In fact, they can cause more harm than good. With each use, they can actually degrade pipelines. Leaks can form over time, causing costly damage and being pricey to repair.
Contact Plumbing Company Near Me
Don’t give up if you wind up with a clogged toilet, sink, or drain. In most circumstances, an experienced, dependable plumber can unclog a clogged drain in a matter of minutes and at a fair price. It is more preferable to have it done correctly than to try to fix it yourself and cause a much larger problem. If you’re in need of plumbing services in the Fox Valley area and beyond, contact Tureks Plumbing Company. Our team of plumbing professionals will fix the problem in no time.
Have you ever reached to open your dishwasher, only to see a big puddle of water at the bottom of it? You’re not the only one. If you have standing water at the bottom of your dishwasher, it’s time to call a plumber. Below, our plumbing contractors in Appleton, WI, share a few tips on how to unclog a dishwasher.
Step 1: Unload The Dishwasher
The first thing you should do if your dishwasher is clogged should be to remove all of the dishes and silverware from your appliance. Once everything is cleared from your dishwasher, remove the bottom dishwasher rack so that you can easily access the bottom.
Step 2: Turn Your Dishwasher Off
Ensuring that your dishwasher is turned off is critical for your safety. You may need to go to your electrical breaker and turn off the electricity in the kitchen. If you need help fixing your dishwasher, you can always contact Tureks Plumbing Services.
Step 3: Drain the Clogged Dishwasher
Once your dishwasher has been disconnected, you’ll need to remove the standing water with a towel. This will allow you to get to the bottom of what started the clog. For instance, there could be pieces of broken glass causing your dishwasher not to drain properly. The chances are that you could find out what’s causing the problem if you just look at the bottom of the dishwasher.
Step 4: Locate the Hose
If you haven’t figured out what’s causing your dishwasher to clog yet, you’ll need to locate the dishwasher’s drain hose. This connects directly connects to your sink’s garbage disposal. Look under the sink or under the dishwasher. You may have to take your dishwasher from out of the wall to access the hose.
Step 5: Clear the Hose
There’s a chance that your dishwasher’s hose needs to be replaced or cleared. After locating the drain hose, detach it from the dishwasher. Our friends at McQuillan Bros, a plumber in Woodbury, MN, about unclogging a dishwasher. They suggest using plyers to loosen or disconnect the hose. It would be a good idea to have a bucket or pan to catch any excess water from the hose. If indeed your drain is clogged, you can try to use can try commercial de-cloggers or grab a coat hanger and unclog it. If you don’t notice any debris that could damage the hose, there could be a clog in the dishwasher itself.
Step 6: Check the Dishwasher’s Drain
Look for a basket-shaped portion at the bottom of your dishwasher and remove it with a screwdriver. Then as you did with a drain hose, use a de-clogging system. If your dishwasher is still not draining properly at this stage, it’s time to search for a “plumber near me.”
Hire a Professional Plumber
To many people’s surprise, it’s very easy to learn how to unclog a dishwasher drain without the help of a professional. However, if not done properly, you can cause more harm than good. Decide whether or not DIY plumbing repair is worth it. To ensure that your dishwasher is working properly, contact Tureks Plumbing today. We offer a variety of plumbing services for homeowners in the Fox Cities and beyond, whether it’s 24/7 emergency service, home remodeling, or residential plumbing services.
At Tureks Plumbing Services, we make it our duty to educate our customers so that they can fix as many plumbing defects in their homes as they can before they have to call a plumbing professional. It is for the same reason that our experts share the different ways in which you can adjust the toilet filling valve if you see that the toilet tank is not being refilled after you’ve flushed, or that the water is still flowing out of the tank because the filling valve has failed to stop further inflows. In the article below, our Fox Valley plumbers share five ways to adjust the toilet fill valve.
What Is a Toilet Fill Valve?
Your toilet has two valves that work each time you use the toilet. The first valve is the flush valve, which allows water to move from the toilet tank to the toilet bowl when you flush. This flush valve closes once all the water has drained from the toilet tank.
The second valve is the toilet fill valve or ballcock. This valve is responsible for controlling the movement of water into the toilet tank. The valve opens when the tank is empty and then closes once the tank has filled to the predetermined level. As already mentioned, this valve may malfunction and either prevent water from flowing into the tank, or the valve fails to stop water from getting into the tank even when the tank is full. Our friends at McQuillan Bros, a plumbing company in Minneapolis, MN, explain that the specific steps that you take to adjust the fill valve will depend on the type of valve that is in your toilet tank.
How to Adjust Your Toilet’s Fill Valve
Adjusting a Piston/Plunger Ballcock
This type of fill valve depends on a ball attached to a float rod (made from brass) to control water flow into the toilet tank. As the ball moves up or down, the rod shifts and activates a plunger inside the ballcock assembly. That plumber can either let water through (if the ball moves downwards), or it can block the flow of water into the tank (if the ball moves upwards).
Adjusting this ballcock is, therefore, a simple task that entails gently bending the brass rod downwards or upwards, depending on your needs. For example, you can bend the rod upwards if the tank wasn’t filling up completely after you flush the toilet. Tureks Plumbing Services cautions that you shouldn’t raise the rod so high that the maximum level of water will exceed the top of the overflow tube. Conversely, you can bend the brass rod downwards if you notice that water was filling the tank to the point of overflowing.
Adjusting Brass Diaphragm Ballcocks
This type of ballcock resembles the plunger valve, except that there is no plunger stem in the brass diaphragm ballcock. The valve body is round and houses a diaphragm seal. Afloat rod moves this mechanism up and down to control water movement. As was the case for the piston valve, you also bend the float rod downwards or upwards in order to adjust the level at which water fills the tank.
Our plumbing company in Appleton, WI, also suggests that you may need to use penetrating oil to free the button of the diaphragm cup if mineral deposits or sediment have locked it in the closed position. Manually push the button down and up multiple times until it can move freely.
Adjusting Plastic Diaphragm Ballcocks
Recent models of plastic diaphragm ballcocks come with an adjustment screw that you can use to alter the fill level of the toilet tank. Turn this screw clockwise if you want to lower the fill level. Conversely, turn the adjustment screw counterclockwise when you want the fill level to be higher.
Adjusting Fill Valves That Have Float Cups
Most toilet assemblies now come equipped with a fill valve that has a float cup, so if yours is a newer house, then it is most likely to have this type of fill valve. The flow of water in such a system is regulated by a cylindrical plastic float. This float moves down or up along the shaft of the fill valve.
A metallic spring keeps the float cup attached to a small float rod. Tureks Plumbing Services advises that you can simply press both sides of this spring and then move the float cup downwards or upwards in order to adjust the fill level of that toilet tank.
Some models of this type of fill valve come with screws that you can adjust to raise or lower the fill level. Check for such a screw and manipulate it to change the level at which the tank fills.
Adjusting Pressure-Activated Fill Valves
Truly floatless fill valves depend on pressure differences to regulate the flow of water into the toilet tank. In this case, the fill valve sits inside the water in the tank. Sensors in the valve detect the pressure differences and cause the valve to move up or down. Check the top of the fill valve and locate the adjustment screw found there. Turn this screw clockwise to raise the fill level or turn it counterclockwise if you want to lower the fill level.
As you can see, the task of adjusting the fill valve is easy once you identify the type of valve in your toilet tank. Contact a plumber in Appleton, WI, for help if you aren’t able to correct the water flow anomaly in your toilet tank despite implementing the tips above. Tureks Plumbing Services offers 24/7 emergency plumbing services in Appleton, WI, so reach out any time you need our services.
Editor’s note: This post was originally published in March 2019 and has been completely revamped and updated for accuracy and comprehensiveness.
5 Tips For Preventing Common Sewer Line Issues 2021
Some of the sewer line problems homeowners in Appleton, WI, face include blocked, corroded, damaged, and root-infested pipes. By implementing the right preventative plumbing tips, you can escape all the hassles and high costs of sewer line and plumbing repairs. Below arefive tips for preventing common sewer line issues.
Do Not Flush Just Anything Down The Toilet
The toilet is designed to accommodate toilet paper and human waste, and nothing else. Avoid flushing diapers, tampons, cotton balls, and other paper products down the toilet since they do not dissolve easily and will simply block your pipes and cause an array of plumbing problems.
Avoid Pouring Oil and Grease in Your Sink
Grease, oil, and fatty substances that can be found in soaps and shampoos can accumulate inside the sewer line and cause a blockage. As such, it is important that you do not throw grease and leftover oil down the kitchen drains.
Installing a grease receptor under the kitchen sink will also help prevent grease stoppage. You can also keep the kitchen drain clean by pouring a mixture of baking soda and vinegar followed by hot water every few weeks or so. Our friends at McQuillan Bros, a plumbing company in St. Paul, MN, recommend keeping a jar under your sink where you can pour grease into it after cooking.
Do Not Plant Trees or Shrubs Near Your Sewer Line
Tree roots naturally move to areas with water supplies, which include pipes. If you are starting a garden, avoid planting in areas near or on top of the sewer line.
You can also consider removing trees planted near the sewer line to prevent the roots from damaging the pipes.
Another option would be to sprinkle copper sulfate crystals around the sewer line. This substance will create a poisonous zone around the pipe and prevent the roots from infiltrating into the pipes.
Lastly, if you want to grow trees, plant ones with shallow root structures such as ash, maple, oak, and willow.
Install a Backwater Prevention Valve
A backwater prevention valve is installed into a sewer line and sometimes into a drain line in the basement of a home or building to prevent sewer backflows. When installed properly, the valve allows sewage to go out but not to come back in.
Have Your Sewer Line Checked Periodically
If you are living in a home that is more than 10 years old, have a Fox Valley plumber check your plumbing system and sewer line every year or so or whenever you have any problems with your drains. A professional plumber will be able to pinpoint the exact cause of your sewer line issue and make the necessaryplumbing repairs. In case you have iron pipes, consider having them replaced with UPVC pipes. They are more effective in preventing tree roots from entering your line.
When you have plumbing problems, contact Tureks Plumbing Services. One of our plumbers will assess your plumbing problem and recommend the solution that fits your budget and your needs. We also offer trenchless sewer repairs for a no-dig plumbing solution. Give us a call today for a free estimate!
Editor’s note: This post was originally published in October 2018 and has been completely revamped and updated for accuracy and comprehensiveness.
How to Tell if Your Sewer Line is Clogged or Broken
No homeowner wants to deal with plumbing problems of any sort, significantly when it can cost thousands of repairs. Your Fox Valley plumbing system goes beyond just the pipes inside your house. Most big plumbing issues typically arise on the mainline, and it’s best to stop them as much as possible. Damaged sewer lines can lead to sewage-filled bathrooms, busted pipes, and expensive repairs. If you’re experiencing any plumbing plumbings or have a plumbing emergency in Appleton, WI, contact Tureks Plumbings Services immediately. Below, we share the different ways on how to tell if your sewer line is clogged or broken.
Signs of Problems With The Main Sewer Line
It can be difficult to decide when the problem has to do with your main sewage line. Your home’s plumbing is complex, and it’s difficult to detect any problems without professional help. Problems like clogged drains are fairly common, but the broken main sewer line is a much greater problem that can be costly. If there is an issue with your main sewage line, professional plumbers in Appleton, WI agrees to watch out for the following warning signs:
Sewage Backup and Blockages
Sewage backups might happen every now and then, but if sewage backs up every time you flush the toilet, the problem could be your main sewer line. Both of your home drains depend on the main sewer line to drain properly. If you’re beginning to encounter blockages in more than one drain, it’s certainly a problem with your main sewer line.
The main sewage line intact should be airtight, which ensures that no odors should escape the pipes. However, if you start to smell anything unpleasant, it may mean a leak in the main sewer line. If the smell of rotten eggs and waste continues to come out of your drains, it’s time to call a plumber.
Mold could be guilty of some issues, but the guilty party may be a broken mainline within the walls of your house. A crack in the line will allow enough water to leak into your house, which can lead to mold growth over time. The mold is dangerous to your health, so if you find that the mold is beginning to grow on your walls or ceilings, call your emergency plumber immediately.
Slow drainage can be a common plumbing issue, and most cloggings can be resolved with a simple fix, such as a plunger or drain cleaning. If simple unclogging methods do not work to fix the slow drain, the problem could be a deeper blockage in the main sewer line. Unfortunately, mainline logs are generally far larger than simple unclogging methods, but digging into the line itself to reach the root of the issue.
Your lawn may look more lush than usual, but it may not be a positive thing. Sewage serves as a great fertilizer, and if you start to see really green grass patches in your yard, it may be from a leaking sewage pipe.
Indentations of the Grass
Our friends at Gilmore Heating, Air and Plumbing, a plumbing company in Sacramento, says to be on the lookout for lawn indentations, as well as lush lawns. If your main sewage pipe is cracked, it will saturate the soil around it, gradually causing it to dissipate and dip. Walk around where your sewer line is buried. If you find any changes in your grass, it may be time to call a plumber.
Damage to Home’s Foundation
A broken main sewer line is more than just a plumbing nuisance; it can cause significant structural damage to your house. Broken sewer lines left unchecked over time can lead to cracks in the foundation of your house, a settled foundation, or even sinkholes.
One of the most visible outdoor signs is if you can see the sewage pool in your yard. If your yard smells bad and there’s a puddle that’s just not going anywhere, the problem may be a broken main sewer pipe.
Unfortunately, the broken main sewage line can also contribute to unwanted pests inside your house. Rats and insects will easily squeeze through holes and gaps in your sewer line and find their way to your plumbing. These pests can be very harmful to your health. If you believe that you have pests in your pipes, a Fox Valley plumber may perform a visual inspection of your sewer system.
Don’t DIY Your Plumbing Problems
If you seem to have issues with plumbing all the time, it’s most likely a problem you can’t solve without professional assistance. Licensed plumbers can not only diagnose the cause of the problem but can safely fix or rebuild the main sewer line if necessary.
Let Your Fox Valley Plumbers Help
Plumbing issues can be a huge annoyance and disturbance to your home and your daily routine. Some plumbing problems can be repaired without professional assistance, but if the problem is with the main sewage pipe, you need to contact a specialist. In order to ensure that the problem is absolutely solved, contact Tureks Plumbing Services in Appleton, WI.
As a homeowner, you’ve probably DIY-ed a bit around your house, from the broken drawer handle to the leaky faucet. These projects are basic and can be done in a few hours. However, there are times when you need to call your Appleton, WI plumber. Otherwise, you may end up creating a bigger problem than the initial issue. Keep in mind that some states do require a licensed contractor to complete plumbing jobs. Below our plumbing contractors share seven plumbing problems you should not DIY.
Gas leaks are very rare, but they’re still hazardous to human health and to human life as well. If you do recognize the rotten egg smell that is a sign of gas, then you should evacuate the house immediately.
Then contact emergency services as well as a Fox Valley plumber and wait outside for help. Do not attempt to fix the leak yourself. A certified plumber knows how to deal with natural gas. This also applies to any gas-related problems you might be experiencing. For your own safety as well as that of others, do not try to fix the issue yourself.
Expanding or Moving Your Pipes
If you are planning to expand your plumbing or to move your pipes on your own, we suggest you don’t. To do this, you need a permit before you can begin your operations, and you also need a professional plumber from Tureks Plumbing Services.
Expert plumbers who are licensed know the code requirements that ensure that you and your family are safe and that you are within regulations.
This refers to any body of stagnant water. If you ever encounter standing water in your home, contact a Fox Valley plumber immediately. It does not matter if it’s your sink, toilet, or water heater. It can be caused by leaky pipes, a clogged sewer line, or cracks in the house’s foundation.
Most of the time, standing water is a sign of a bigger issue. So before you begin digging into the problem, get a professional Appleton, WI plumber who will use their expertise to determine the exact cause and repair the problem before your house turns into a waterpark.
Rerouting External or Internal Pipes
If your DIY repairs involve the tearing down or opening up of a wall or the digging up of your yard, then you should, without a doubt, get a professional involved. The issue may be larger than it seems, and without expert knowledge, you can’t really tell for sure.
If you would like to reroute your pipes, involve a certified plumber first. They will inspect your home and make sure that it can accommodate the changes you’d like to implement. A professional plumber will also determine whether those modifications will be up to the plumbing regulations and standards that are set by the local and state government. If they aren’t, they may suggest other ways to execute your desires. Their knowledge helps advise on practical ways of doing what you want, the right way.
If your appliances such as the sump pump, water heater, or any other water-based appliances have issues, it’s best to have an expert come check them out. The maintenance or replacement of these appliances can be a demanding process that requires skill. Only a licensed plumber from a Fox Valley plumbing company can replace or repair these appliances correctly.
Large Water Connections & Water Pressure
Every homeowner should have the know-how or ability to turn off the water supply in their own home. For simple DIY projects, shutting off the water is not a big deal. However, if you are unsure about which lines to shut off or you need to handle a large water connection, it would be best to call in a professional.
Your home’s water pressure can be tricky to maneuver. Do It Right Plumbers, an Orange County plumbing company, often gets calls from customers complaining about their water pressure. Most have tried just about everything and can’t seem to figure it out. Trust us, it’ll save you the time and hassle if you contact a professional plumbing company.
Bad smells may be an indication of a much larger issue. More often than not, it is caused by bacteria that feed on the buildup inside your pipes. The materials you flush down the drain can cling to the pipes’ sides and create a biofilm.
If some vents of your plumbing system fail, you may also notice a foul odor coming from them. The bottom line is the pipes need to be taken apart and cleaned. This should be done by a professional plumber from Tureks Plumbing Services. Contact us today for the professional plumbing help you need.
So, you’re doing the dishes at the kitchen sink, and suddenly, you hear a gurgling sound. Why are my drains gurgling? Gurgling is usually caused when there’s something that’s blocking air or water from flowing in your pipes. Water traveling slowly in your pipes forms air bubbles that create a gurgling sound.
There may be different things that cause the blockages that result in the gurgling sound. Experts at a Fox valley plumbing company highlight some of those factors:
A Blocked Sewer Line
This is the pipe that carries all the wastewater from all the pipes in your house to the septic tank or main sewer line in your yard or street. If you have a clogged sewer line, then all the pipes in your house will be affected.
However, if you aren’t sure whether your sewer line is clogged, try flushing the toilet upstairs. If sewage starts to overflow from any pipes below, it is likely blocked.
Usually, the main blockages for sewer lines are due to:
Tree roots (these are the most common cause)
Trees need water to survive. This water is usually absorbed using the roots underground. Roots can grow into old drains in search of water. They may cause the breakage of pipes, which may result in unplanned expenses.
In Appleton, WI, bathroom products are the biggest cause of blockages in sewer lines.
Below is a list of bathroom products you should not be flushing down the toilet:
Pads and Tampons
If you do flush them down the drain, please refrain from doing so frequently. Also, look for alternative means to dispose of your products.
A Blocked Vent System
The plumbing vent in your house allows air to pass through the pipes without interrupting the water flow. Drain or sewer vents usually extend to the outside of the house (mostly through the roof) from the waste pipes.
If your plumbing vent is clogged, then your plumbing system will not function.
To determine if your plumbing vent is clogged, you can:
Try to listen for your pipes gurgling
Observe the speed at which your water drains
Smell for any bad odors that may be coming from your drain.
These odors are mostly caused by the gases and air that have been trapped in the pipes, which create a foul smell.
A Blocked or Damaged P-Trap
A P-Trap is a curved pipe that holds an amount of water under any sink in your house. The P-Trap’s main purpose is to create a water seal that prevents sewer gases from exiting through your drains, which protects your home from bad odors.
If your P-Trap has been damaged or has not been installed correctly, you’ll notice a stench when you flush the toilet or when water is flowing into your sink or shower drain.
If you can smell the sewage, then the time has come for you to replace your P-trap.
However, if your P-Trap is located in your wall or underground, please contact a professional from Tureks Plumbing Services.
I advise you not to DIY this, or it may end up costing you a lot more time and money, in the end, to repair it professionally.
A Blocked Drain
The main reason your pipes are gurgling could be either a partial or complete blockage. There’s a difference between the two and knowing how to differentiate between them is important.
A Partially Blocked Drain
A partially clogged drain is a few moments away from being a completely clogged one. To know whether you have a partially blocked drain, note how long it takes to drain water. If the water drains slower than usual and you can hear some gurgling, that means your drain is partially blocked.
The first thing you should do is clean your pipes using a pipe cleaner as soon as you notice your water draining slowly.
A Completely Blocked Drain
Ignoring a partially blocked drain and not cleaning it will result in a completely blocked one.
When the water rises in your bathtub or sink instead of draining, then you have a completely blocked drain.
Some of the causes of a complete drain blockage are:
Oils or grease
Toilet paper build-up
Our friends at McQuillan Bros, a plumbing company in St. Paul, MN, agrees that if you have more than one drain in your house that is experiencing a blockage, this may indicate a blockage in your sewer line.
You should contact a sewer pipe repair company in Appleton, WI, to scope the line, that is, use a camera to inspect the reason for the clog. You can always count on Tureks Plumbing Services to provide 24/7 emergency services. We’ll restore your plumbing back to its original glory!