Tureks Plumbing Services Blog: Archive for the ‘Kitchen Plumbing’ Category

Causes of Leaking Garbage Disposal

Tuesday, July 25th, 2017

Fixing the 2 Most Common Causes of Leaking Garbage Disposal

A leaking garbage disposal system does not necessarily translate to a massive hole in your pocket. Leaks can occur from time to time and in some instances, you do not have to spend a small fortune to remedy these problems.

Here’s a brief rundown of two of the most common causes of leaks and what you can do about these.

Gasket

Check your garbage disposal system and determine where exactly the leak is coming from. If the leak is coming from the top rim where the rubber seal and the flange meet, it is highly likely that the cause of the leak is the gasket which can be found on top of the system.

Over time, the rubber gasket breaks down. In some cases, if the garbage disposal system is not used for an extended period of time, the gasket can dry up, causing leaks. Sometimes, the gasket causes leaks if it is replaced unevenly. Finally, if you dismantle the system for whatever reason, it is a good idea to replace the gasket.

Fortunately, if the gasket is the cause of the leak, it can be easily replaced. Just make sure that you purchase the right gasket for your garbage disposal system.

After you have bought the correct gasket, the first thing that you need to do to replace the old one is to disconnect the drain. After that, you can unplug the cord. Make sure that you remove the dishwasher drain hose from the system.

Next, hold the sides of the mounting nuts and turn these counter clockwise. This will unlock the garbage disposal system.

The next step that you need to do is to remove the old gasket and put the new one that you bought. Check whether the new gasket fits properly.  After that, you can replace the garbage disposal system and reconnect the drains and plug.

Disposal flange

If the leak comes from the upper area of the garbage disposal system, the possible source of the leak is the disposal flange.

The flange can leak if the seal is not tight enough or has become loose. In either case, you will need to dismantle the system so that you can reseal the flange.

After dropping the garbage disposal unit, you will need to loosen the bolts that hold the flange in place. Next, find the clip that holds the flange in place by using a flat screwdriver to pop it out of place. Then, remove the top flange from the sink. You should then clean the sink before reinstalling the system and applying putty.

In applying plumber’s putty, make sure that you apply an even amount. You should also make sure that the putty wraps around the rim of the flange. After that, you can put the flange into its original position and replace the bottom flange. Replace the screws tightly and then you can clean the area where you worked. And schedule your appointment with us today!

Continue Reading

Farmhouse Sink: Trendy or Timeless?

Friday, July 21st, 2017
Is the farmhouse sink trendy or timeless? Although still largely seen as traditional, the farmhouse has quickly become a popular fixture in modern homes as well.

This short guide will show you how this rustic sink has evolved through time. If you are planning to renovate your kitchen anytime soon, the list of pros and cons may help you decide whether it is worth buying or not.

Form and Function

The farmhouse sink is characterized by the deep design of its basin. Sometimes known as apron-front sinks, these kitchen fixtures were designed to hold copious amounts of water and wash large cooking tools. The basin is so deep that you can bathe a baby in it.

Farmhouse Sink Installation

A typical farmhouse sink is installed with the apron protruding beyond the cabinets below it. This design feature is meant to protect the cabinets. If the water starts to overflow, the liquid will fall straight to the floor instead of damaging the cabinets beneath the sink.
The width and depth of a farmhouse sink offers homeowners ample space for washing dishes and kitchen tools. On the other hand, farmhouse sinks are also bulky. Standard sinks weigh around 20 to 30 pounds while an apron-front type may weigh up to 100 pounds. If you intend to replace your standard sink with a farmhouse one, you will need to find a way to reinforce the supports around the sink.
Farmhouse sinks don’t come with holes for faucets. As a result, the faucet needs to be installed on the wall or counter. On the upside, if the sink ever gets damaged, you can take it out without the need to turn off the water mains. However, you will also need to pick the right type of faucet to go with your country style sink.

Materials

Farmhouse sinks were traditionally made out of porcelain or fireclay. During the 1920s, sinks forged out of cast iron, copper and nickel alloy became popular. Nowadays, you can find farmhouse sinks made out of stainless steel, concrete and stone as well. Farmhouse sinks also come in a wide range of available styles and textures to suit varying design needs.

Price

Finally, going for a specific style can be expensive. With farmhouse sinks, expect to pay hundreds of dollars more than your standard type. Plus, you will need to consider the installation cost and other fees. Make sure to explore these expenses carefully before making your decision.

Continue Reading

5 Things That Cause Drain Clogs

Thursday, July 20th, 2017

It is normal for debris to accumulate over time, but there are certain items that can make your drains clog faster. The following are five of the likeliest causes of drain clogs and what homeowners can do to reduce the chances of a blocked drain.

Hair

Clogs caused by hair strands are more common in bathroom sinks, showers and tub drains. Each time you shower, you lose hundreds of strands. These thin strands normally get washed away, but on a rare occasion, strands may get stuck along the walls of your drain pipe. Over time, the buildup can block the flow of water and clog your drain. Installing a hair catcher or sink guard helps, but won’t totally prevent clogs. It is possible to find clogged bathroom drains, especially in older homes.

Soap

Dirt, grime, hair strands, dead skin cells and other types of waste can stick to the soapy residue and cause a blockage. Other than bathroom sinks, showers and tubs, soap scum can also become a problem when washing dishes. One way to reduce this buildup is to pour two buckets filled with hot water and chlorine down the sink at least twice a month.

Grease

Grease buildups more commonly occur in kitchen sinks. Similar to the case of soap scum, small food particles and other sediments can get trapped in this thick, gooey liquid. However, unlike soap, the oily residue is more difficult to remove. You can try using cold water when running your garbage disposal. This can help remove some of the layers of grease and let the fat flow more freely through the drainage pipes.

One better way to prevent grease buildup is to avoid pouring any type of oil down the drain at all. Instead, what you can do is to pour the grease directly into the garbage. This prevents any residue or particles getting stuck along the pipe’s walls.

Toilet paper

Toilet paper sheets are designed to break down easily when exposed to water. This makes the sheets easier to flush. However, paper towels, baby wipes and multi-ply tissue paper are more durable and may not break down as easily as a single ply sheet of toilet paper. To prevent blockage, avoid flushing these types of toiletries down the toilet. Inform your relatives, friends or guests to do the same when staying at your home.

Napkins and diapers

Finally, these types of hygiene products are a major cause of concern. Because they are designed to absorb water, napkins, diapers and other similar products can quickly cause a blockage. Always throw these types of items straight into the trash and not into the toilet bowl. And make sure to call us today!

Continue Reading

Attracting home buyers with a beautiful kitchen

Tuesday, June 20th, 2017

How to Prep Your Kitchen for Resale

To have an easier and faster time selling your home at the price you’re looking for, you need to invest some additional money and time to make it attractive for potential buyers. However, you can’t just focus on improving certain areas or features of your home; to catch the attention and interest of buyers, you need to make sure all the rooms are appealing and devoid of any issues or problems.

A key area of your house you have to pay attention to is the kitchen. This is one of the areas in a home that matters a lot to many interested buyers since it is highly likely they will spend a lot of time in this room.

If you will be putting your home in the market, here are some useful tips to successfully prep your kitchen for resale without shelling out a huge amount of cash:

Clean your kitchen.

Give your kitchen a good scrubbing and wipe-down. Vacuum the areas which you never used to clean before such as the spots behind the stove and refrigerator. Get rid of any clutter in the kitchen as well such as old cookbooks and food containers you never use. Make sure your kitchen is free from unpleasant smells such as the ones emanating from the garbage. Remove all garbage, recycling, and smelly pet-related items before showing your home. Keep in mind that nothing turns off a potential buyer faster than a bad smell.

If you don’t have the time to properly clean your kitchen, hire cleaning professionals to do the job for you. They will make sure your kitchen is sparkling clean and nice-smelling, too.

Make sure your kitchen faucets and plumbing system are working properly.

While cleaning the kitchen sink, check the faucet and pipes for leaks and clean these features as well. In case the water pressure is low or water leaks from the handle of your faucet, take the time to clean your faucet’s aerator. You can also remove lime or calcium buildup in the faucet by removing the aerator and using vinegar as a cleaning agent. In case there are leaks or you simply want to have the faucets and pipes replaced, it is best to call a professional plumber to avoid any further damage to your kitchen’s plumbing system.

Organize your kitchen cupboards and cabinets.

Interested buyers will take the time to look inside your cabinets and cupboards. If these storage features are overstuffed, it usually gives the impression that there isn’t enough storage space in your kitchen. As such, remove all excess and mismatched items and anything that simply doesn’t look good – even if you think you’ve hidden them well.

Make sure the kitchen windows are clean and clear.

Clean the kitchen windows inside and out. You will be surprised at the effect that clean windows can have on your kitchen (and in any room), especially during a sunny day. In case there are curtains or other types of treatments covering your windows, make sure they are clean as well or open them when you are showing your kitchen.

Consider having your kitchen painted.

Finally, aside from cleaning, giving your kitchen a new coat of paint will give it a new, crisp look. Consider having your kitchen painted in a hue that works with the color of your counters and cabinets. You can always stick with white if you don’t want to experiment with colors. In case your kitchen was recently painted, examine the walls and ceiling and touch up any flaws, even the smallest ones. Call Tureks plumbing today to help rebuild your kitchen!

Continue Reading

Tips on Adding a New Kitchen Island

Wednesday, June 14th, 2017

Adding a Kitchen Island

Remodeling your kitchen can be a very exciting home improvement project. This is because most of the features you will want to have in this room have to be both functional and aesthetically appealing. As such, you will have to be a bit more thoughtful and creative when you want to improve your kitchen.

Adding a kitchen island is one of the smart kitchen renovation ideas you can consider today. A kitchen island is a very practical, convenient, and handy feature to have in the kitchen. This modern kitchen feature provides several benefits, which include:

  • It provides additional work space in the kitchen
  • It permits people to sit and eat in the kitchen without anyone getting in the way of the person working in the room
  • It removes the need for a table in the kitchen
  • Lastly, it can serve as the focal point or feature in the kitchen, mainly because of its position in the middle of the room. When it is designed properly, guests will definitely be impressed by this feature

Initial Considerations When Choosing a New Kitchen Island

Once you have decided that a kitchen island is the best (and smartest) new feature to have, you need to think about certain important factors to make sure you get the ideal one for your home. These key factors are:

Kitchen Island Size.

Your kitchen island should be the right size for your kitchen space. It has to be big enough to double as your working and dining space but not so large that people will have trouble walking, cooking, and moving around once it is installed. A good rule of thumb to remember when having a kitchen island installed is to ensure that there should be at least 36 inches of clearance on all sides of the fixture.

Shape.

When choosing which shape to go for, consider the size of your kitchen and the primary use of the island. Aim for a shape that works with the current design of your kitchen and one that is convenient for you and everyone who will regularly use it.

The island’s countertop material 

Kitchen islands can be made of different materials; it’s the same with the countertop. Some of the most popular countertop materials today include wood, granite, marble, quartz, and soapstone. When choosing the material, consider the other fixtures in your home so that it doesn’t clash with the current design. Opt for a material that is durable, long-lasting and low maintenance as well. Lastly, consider the size of your doorway because if the countertop is too big, you will have a hard (and even impossible) time to get it inside the kitchen.

Features and amenities.

Lastly, determine how many drawers and cabinets you want the island to have. Keep in mind that the kitchen island is the perfect way for you to add features to your kitchen that is lacking, such as drawers, or other things that will make your life just a little bit easier, such as hooks for hanging towels or even a built-in microwave. To ensure your island is amenable to seating, consider the type of stools or chairs you plan to use and make sure the feature can accommodate the proper height and legroom requirements. Schedule an appointment with us today!

Continue Reading

What you need to know about tankless water heaters

Saturday, June 3rd, 2017

8 Things You Need to Know About Tankless Water Heaters

Hot water is one of the most appreciated conveniences in the western world. It is essential to upholding day-to-day hygiene requirements and to wellness, especially during the chilly months.

Back in the days of old, it took a long time and much physical energy to heat enough hot water for bathing, but today, all you really have to do is turn on your faucet or shower for a steady stream. This is if you already have a water heater installed at home.

And speaking of water heaters, there are different kinds. A lot of homeowners in the Applegate and Fox Valley communities prefer tankless water heaters because these only provide hot water when needed and, therefore, are more energy-efficient. Water heaters are among the biggest energy consumers installed in most houses, but tankless water heaters don’t create the budget setback that conventional heaters do.

If you’re building a home and you’re not sure what type of water heater to use, here are eight things you need to know about tankless water heaters that will surely help you decide.

  1. Most tankless water heaters provide hot water at a rate of two to five gallons of water per minute.
  2. Gas-fired tankless water heaters produce higher flow rates than their electric-powered counterparts.
  3. These are easy to install, therefore, you can place multiple units in your home.
  4. For households that typically consume 41 gallons of hot water, tankless water heaters are more suitable to use. They are 24 to 34 percent more energy-efficient than conventional storage tank water heaters. Meanwhile, for homes that consume more hot water than that, tankless water heaters are still more energy efficient by 8 to 14 percent.
  5. Although these are more expensive than conventional water heaters, you can recoup the cost due to its energy efficiency. You’ll see the big difference in your monthly energy bill.
  6. Tankless water heaters also outlast storage water heaters. They can last over 20 years while storage water heaters’ functional lifespan usually only ranges between 10 to 15 years.
  7. Your household can avoid the standby heat losses often created by some storage water heaters.
  8. Proper installation is a must in ensuring energy efficiency, so make sure that you hire the best Fox Valley plumbers for the job.

All in all, if you want to enjoy hot water without consuming too much energy, tankless water heaters are the smart option. Implement energy-efficient practices and your home can really lower its energy expenses. Call us today to set up your appointment!

Continue Reading

A Guide to Locating Leaky Pipes

Thursday, May 18th, 2017

Appleton Plumber Provides Advice in Locating Leaky Pipes

Isn’t it just annoying when you find a puddle in your house and you’re not sure what or who created it? Before you conduct your sleuthing, tough, you better wipe it up first lest somebody slips on it.If water no longer reappears after wiping up the area, it’s quite likely that somebody just spilled something on the floor. However, if a new puddle forms, one of the possible causes is a leaky pipe.

If you suspect that you indeed have leaky pipes, the plumbers trusted by Fox Valley and Applegate residents have an easy guide, provided below, that you can follow to locate where the leaks are.

How to take care of the problem

  1. Wipe up the puddle again and then place paper towels or bags around the area where you found the puddle. The leak may be coming from under the floor or from the pipes located on the walls or overhead. If a drip falls, it will surely leave a spot and it’s going to be easy finding where the drip came from.
  2. Do check supply lines or water-using appliances around the area as well. They may have rips or splits, or hoses that have come loose. Turn on the water to see if there are leaks anywhere and then turn the supply off once you see a puddle forming somewhere. It helps to perform this task to establish whether your damaged plumbing system or something else causes the puddle.
  3. Once you identify where the leak is coming from, see if you can perform a remedial job that can control the leak until you can get a plumber to carry out a proper repair.
  4. Now, if you no longer see a puddle after wiping it up, this doesn’t mean that there’s no leak. Observe the area for the next few days because it may just be a slow leak and it only creates a puddle when certain activities at home increase water pressure. You also need to take care of slow leaks because over time, they may get worse. Have your plumber have a look at them so preventive work can be carried out.

If you simply cannot find where the accumulation of water is coming from, set an appointment with your plumber right away. Leaks are no light issues; they can be the cause of accidents, they can attract moisture-loving pests (cockroaches, moths, spiders, and rodents), they can encourage the proliferation of harmful bacteria and molds, they can cause damage to other structural elements of your house or to your furniture, and they can create a spike in your water bill. Contact one of our Appleton, WI plumbers today!

Continue Reading

Benefits of Walk in Tubs for Seniors

Wednesday, May 10th, 2017

Safer, Easier Bath Time with Walk in Tubs for Seniors

Baths are dangerous places for the elderly and infirm. Slippery water, slick porcelain, thresholds that need to be stepped over — it’s a formula for disaster if you aren’t steady on your feet. Aside from adding grab bars and non-slip shower mats, it’s usually best to also install walk in bathtubs. This is one of the most common solutions in elderly and medical care facilities.

Just Lets You Walk In

Walk in tubs allow senior folk to walk straight into the tub and forgo the perilous exercise of stepping over the tub’s edge one shaky leg at a time. They go through an inwards-opening watertight door. A seat is also installed into the tub, which allows the elderly to sit comfortably while they take a bath and relax.

All these accommodations naturally make walk in bathtubs costlier than the norm. Expect price tags to start at around $2,000, with more luxurious designs going upwards of $10,000. The $8,000 difference between low and high-end walk in tubs include, but are not limited to:

  • High-speed drains
  • Shower wands
  • Complex temperature controls
  • Bubbling jets, and more

Finding the Perfect Tub to Walk Into

Walk in tubs are investments not only because they tend to be expensive; you also need to pay close attention to the design and features of your purchase. Since they’re designed specifically to meet the needs of the infirm and the elderly in the bathroom, you need to closely inspect if they meet the needs of whoever will be using them.

Consider, for instance, that some walk in tubs have narrow entrances, and the senior who will use the tub may not be able to easily navigate the entrance if it’s too narrow. Others have small ridges that you have to step over — much smaller and easier to surmount than an ordinary tub’s full height — but it could still prove to be an inconvenience. Make sure the person who will be using the walk in tub can get an opportunity to see it and try it out before purchase.

A Caveat: Walk In Tubs Require Patience

Since they have installed doors, it’s obvious that the elderly using them won’t be able to “walk into” a tub full of water. Walk in tubs are filled with the user already inside, and likewise, drained completely before the user gets out.
This means you also need to closely consider temperature controls — nobody wants to sit in an empty tub filling with cold water while waiting to bathe. Nobody wants to wait while the tub takes its time to get filled, too, so there’s another factor. In the same vein, since users can’t exit without draining the tub first, drain times should also be factored in.

Walk in tubs for seniors are a valuable and pricey investment; ask your plumber for more details.

Continue Reading

Common Plumbing Problems In Older Homes

Thursday, April 27th, 2017

Even in today’s digital age, many people are still looking to buy older homes. But often, these buyers are only looking at the surface of the house.

It’s important to look beyond what you can easily see — for instance, check the pipes.

Galvanized Pipes

Plenty of older homes have galvanized piping. A galvanized pipe is made of steel covered with a layer of zinc to protect it. But the zinc erodes from the piping over time, which causes the pipes to fail from the inside. In turn, this leads to different problems like stopped-up toilets and faucets and low water pressure. Sediment will fill the pipes as they corrode, thereby blocking water flow.

Concrete or Cast Iron Pipes

Some older homes have these kinds of pipes. Concrete pipes won’t deteriorate; however, they will shift and move under the home’s foundation. Cast iron pipes, on the other hand, will deteriorate over time just like the galvanized pipes but can eventually disappear.

Lead Pipes

These pipes have a lifespan of a century. Although they wear well, they may leak lead into the drinking water, causing serious health conditions to households.

Copper Pipes

These can be too pricey for home plumbing, but copper pipes are reliable and durable since they are not prone to leaking.

What else to look for?

Thoroughly check the components attached to pipes, water heaters, drains, and other plumbing systems regularly. When they are not maintained properly, huge problems can happen.

A valve on a line might look normal but it may not work well. Just because it is not leaking does not necessarily mean that there’s no problem with it.

How to Manage Plumbing Issues in Older Homes

  • Determine what kind of pipes were installed – Whether the property has copper, galvanized or concrete pipes, let a licensed plumber inspect it. This professional knows if the pipes are still fully functional or already need replacement.
  • Have a professional check the foundation of the property – Aside from the deteriorating pipes, it is also possible that tree roots have strangled the property’s sewer lines. To prevent costly future repairs, ask a certified professional to check the foundation of the sewer lines and septic systems of the property.
  • Renovate – This is the last resort in managing plumbing issues in older homes. Replace the older pipes with new plumbing systems. Also, replace or repair the property’s water lines, drains, vents, and sewer lines.

Prior to buying a house, it’s always best to know and understand the common plumbing problems in older homes. Also, you should have a professional plumber evaluate the property’s current plumbing condition – which is why you should call us today!

Continue Reading

Things To Know When Installing A Tankless Water Heater

Tuesday, April 25th, 2017

Also known as a “demand type” water heater, a tankless water heater provides hot water only when needed. As such, it does not produce standby energy losses, which saves you money.

How a Tankless Water Heater Works

Water is being heated without the use of a storage tank. Cold water will travel from a pipe to the unit if a hot water tap is turned on. This means a tankless water heater delivers a steady supply of hot water. In other words, you do not have to wait for the storage tank to be filled up with enough hot water each time you need to use it.

Why Opt for a Tankless Water Heater?

  • Heating costs will be reduced – Enjoy monthly savings of up to 40% off your utility bill for the product’s life. Heating and reheating water in the storage tank is not required.
  • Only a small amount of space is needed – As compared to traditional water heaters, tankless water heaters will take up less space since this is just about the size of a small suitcase or even smaller.
  • Eco-friendly – Tankless water heaters are 30% more energy-efficient than tank water heaters. Maximum energy efficiency will help conserve natural resources.
  • Long-lasting – It has a longer lifespan for up to twice as much as that of the traditional water heater. This further means less waste in the landfill.
  • Clean – Avoid using water stored in a tank with accumulated rust.
  • Safe – A tankless water heater is equipped with excellent safety features to prevent injuries and burns caused by boiling water.

Installing and Maintaining Demand-Type Water Heater

Proper installation will greatly depend on different factors. These include the following:

  • Local building code requirements
  • Climate
  • Fuel type
  • Safety issues

Regular water heater maintenance is also important to extend the life of the water heater. This will also decrease loss of efficiency.

Proper installation and maintenance are very crucial to optimize the water heater’s energy efficiency. Therefore, it is best to have a licensed, skilled plumbing and heating contractor to install your tankless water heater.

Tips for Choosing the Right Contractor

  • Ask for references. Satisfied customers will give you peace of mind.
  • Request cost estimates from different contractors. Make sure that these estimates are for completed work and not just for sections of the system.
  • Check if they can get a local permit when necessary.
  • Determine if they fully understand local building codes.
  • Check if the plumbing contractor company is a member of the Better Business Bureau.
  • Sign the contract only after you’ve read and understood it.

If you’re looking to install a tankless water heater, please call us today!

Continue Reading