Explore Your Path to Success: Check Out Our Exciting Career Opportunities! Read More

Skip navigation

24/7 Emergency Service

920-731-0462

Proudly Serving Appleton, WI and the Fox Valley

Menu

Tureks Plumbing Services Blog

How Does the Trenchless Pipe Repair Process Work?

How Does  the Sewer Pipe Lining Process Work?

Having sewer lines replaced or repaired can be difficult. Traditional pipe repair methods require a long, deep trench from your house to your curb to gain access to the pipe underground. This method is costly and can be damaging to your property, says Rancho Cordova Pipe Repair Company, Gilmore Heating, Air, & Plumbing.   

Fortunately, Tureks Plumbing Services now offers trenchless pipe repair so that you don’t have to go through those problems. If the pipes were made from clay, iron, concrete, or other materials, chances are those pipes are worn down. One of our pipe repair professionals in Appleton, Wisconsin, can perform a camera video inspection to confirm that you can benefit from our trenchless pipe relining service, or another method would be better suited to the existing defect.

Trenchless Pipe Repair Explained

First, our pipe repair company in Appleton, Wisconsin will determine if trenchless pipe relining can be done on your property. 

  1. A pipe repair technician will use a sewer camera to identify and evaluate the problem.
  2. An access hole is dug at both ends of the pipe. 
  3. A flexible tube is pushed into the old pipe. The flexible tube looks like neoprene, and it is coated with a special resin.
  4. The technician pumps compressed air into it so that it can blow out and cling to the interior walls of the old sewer pipe. 

After several hours, the resin hardens and then there will be a solid pipe inside the existing pipe. At this point, the pipe will have a slightly smaller internal diameter. This is hardly anything to worry about because the pipe will allow wastewater to flow through easily since the pipe is now smooth, and roots will no longer penetrate it.

No Damage to Trees

When undergoing traditional methods, any trees in the way of the trench have to be uprooted to access the pipes underneath. With point repair, trees can remain intact during the work.

Using advanced tools, Tureks Plumbing Services personnel can map and locate all the underground utilities to avoid disruption of those areas. This is why trenchless pipe repair doesn’t pose threats to anything else underground.

Pipe relining may not be an option if the sewer pipe on your property has a low point where water can pool. Similarly, offset pipe sections also preclude the use of trenchless pipe repair, and our Appleton plumber will recommend an alternative repair method, such as traditional excavation or pipe bursting.

Is Trenchless Pipe Repair Right for Me?

The only way to be certain that trenchless pipe repair is feasible on your property is by having an experienced professional conduct an inspection. If the method is applicable, you will get to enjoy this long-term, cost-effective pipe repair method. Even if trenchless pipe repair can’t be used, we will use the most suitable techniques and tools to restore the structural integrity of the sewer pipes on your property. Contact a Fox City plumber today and learn more about how trenchless pipe repair can be used in your home.

Comments are closed.